1.Gao H, Liang L, Chen X, et al. Feature Extraction and Recognition for Rolling Element Bearing Fault Utilizing Short-Time Fourier Transform and Non-negative Matrix Factorization[J]. Chinese Journal of Mechanical Engineering, 2015, 28(1):96-105.
2.Zhang D, Dong G, Chen Y, et al. Electrophoretic deposition of PTFE particles on porous anodic aluminum oxide film and its tribological properties[J]. Applied Surface Science, 2014, 290(1):466-474.
3.Qin L, Lin P, Zhang Y, et al. Influence of surface wettability on the tribological properties of laser textured Co–Cr–Mo alloy in aqueous bovine serum albumin solution[J]. Applied Surface Science, 2013, 268(268):79-86.
4.Zhu X, Zhang Y, Zhu Y. Bearing performance degradation assessment based on the rough support vector data description[J]. Mechanical Systems & Signal Processing, 2013, 34(1-2):203-217.
5.Yan K, Wang Y, Zhu Y, et al. Investigation on heat dissipation characteristic of ball bearing cage and inside cavity at ultra high rotation speed[J]. Tribology International, 2016, 93:470-481.
6.Wu T, Peng Y, Wu H, et al. Full-life dynamic identification of wear state based on on-line wear debris image features[J]. Mechanical Systems & Signal Processing, 2014, 42(1-2):404-414.
7.Wang H, Meng Q. Analytical modeling and experimental verification of vibration-based piezoelectric bimorph beam with a tip-mass for power harvesting[J]. Mechanical Systems & Signal Processing, 2013, 36(1):193-209.
8.Wu T, Wu H, Du Y, et al. Imaged wear debris separation for on-line monitoring using gray level and integrated morphological features[J]. Wear, 2014, 316(1-2):19-29.
9.Cao J, Zhou S, Wang W, et al. Influence of potential well depth on nonlinear tristable energy harvesting[J]. Applied Physics Letters, 2015, 106(17):515-530.
10.Zhou S, Cao J, Chen Y. Genetic Algorithm-Based Identification of Fractional-Order Systems[J]. Entropy, 2013, 15(5):1624-1642.
11.Jing, Minqing, Liu, et al. Optimization of sequential subdivision of depth of cut in turning;operations using dynamic programming[J]. International Journal of Advanced Manufacturing Technology, 2013, 68(5-8):1733-1744.
12.Liu Y, Liu H, Yi J, et al. Investigation on the Stability and Bifurcation of a 3D Rotor-Bearing System[J]. JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, 2013, 21(14):85-86.
13.Peng J, Hong J, Zhuang Y. An Integrated Mechanical–Thermal Predictive Model of Thermal Contact Conductance[J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2013, 135(4):676-709.
14.Zeng Q. Influence of Load and Sliding Speed on Super-Low Friction of Nitinol 60 Alloy under Castor Oil Lubrication[J]. Tribology Letters, 2013, 52(1):47-55.
15.Pei L, Wei C, Zhu A B. An improved practical model for wear prediction of revolute clearance joints in crank slider mechanisms[J]. Science China Technological Sciences, 2013, 56(12):2953-2963.
16.Zhang Q, Diao D. Potential of graphene layer controlling nano-wear during C 60, intrusion by molecular dynamics simulation[J]. Wear, 2013, 306(1-2):248-253.
1. 洪军，刘光辉，万少可，李小虎，吴文武，王梦茜，马劭航，“一种主轴轴承最优配合参数设计方法”，专利号：ZL201410315488.7
2. 洪军，朱林波，朱永生，杨国庆，蒋翔俊，刘伟强，“一种螺纹紧固件横向振动试验装置及试验方法”，专利号：AL201410177952.0
3. 董光能，林平，秦立果，曾群锋，“一种波纹状织构化表面的制备方法”，专利号：ZL201210158298.X
4. 朱永生，洪军，田久良，郭俊康，王梦茜，李纯洁，“一种机床主轴轴承动态预紧力测量方法”，专利号：ZL201110454750.2
5. 武通海，徐金平，吴虹堃，王硕，李小芳，“一种风电变速器的润滑轴在线检测方法”，专利号：ZL201510141574.5
6. 李宝童，洪军，刘春青，庄艳，杜飞，“一种确定固定结合面法向接触刚度的方法”，专利号：ZL20121003837.6
7. 张进华，洪军，王保增，李宝童，王晨，张程，“一种下肢康复系统中主动参与度的生物量化评估方法”，专利号：ZL201510419976.7
8. 李小虎，柳松玮，张燕飞，吕义发，朱雷，“基于多路电磁换向阀二进制流量调控的数字变量泵”，专利号：ZL201510359944.2
9. 刘志刚，洪军，李宝童，李逸群，郭俊康，武晓攀，“一种滚动直线进给系统运动误差预测模型建立及预测方法”，专利号：ZL201410445729.X
10.曾群锋，董光能，韩少星，彭润铃，刘鹏，“一种对服役润滑油性能的改善方法”，专利号：ZL201510578803.X
